Welcome to visit Changzhou Jiachen Oil Preparation Products Co., Ltd's official website!



PRODUCTS

CONTACT

  • Tel:400-855-1230
  • contact : Mr Chu
  • Phone : +86-13506116401
  • Tel : +86-0519-88781384
  • Fax : +86-0519-88491079
  • Add : No.210, Hengyu Road, Shunzhuang, Henglin Town, Changzhou, Jiangsu

Aluminum Wire Drawing Oil

JC - 5 aluminum wire drawing oil

JC - 5 aluminum wire drawing oil

The category :
Aluminum Wire Drawing Oil
Ordering hotline : 400-855-1230

Description

1. product performance and use scope
This product is based on the medium viscosity lubricating oil and add the antioxidant, antirust, defoaming, low temperature flow, and other additives to reconcile, and has good lubricity and thermal stability and anti-rust anti-corrosion property and extreme pressure grinding.
Is suitable for the domestic various types of medium and high speed of aluminium wire drawing machine and imported aluminum wire drawing machine, can also be used for water tank and oil immersion type aluminum wire drawing machine is special processing oil.
2. the technical requirements

project Quality indicators Test method for
Oil-based viscosity (15 ~ 35 ℃) Brown to light yellow liquid visual
Kinematic viscosity (40 ℃), was a/s 43 GB/T265
Kinematic viscosity (100 ℃), was/s not greater than 5.6 GB/T264
Water, no more than % trace GB/T260
Flash point (opening), ℃ below 150 GB/T3536
Condensation point, ℃ higher than not —6 GB/T3535
45 ﹟ corrosion test (aluminium, steel, full immersion, 55 + 2 ℃ for 24 h) qualified GB/T0195

3. Product features
1. Good lubricity, can improve the aluminium wire surface finish, reduce mould wear and tear.
2. Good stability and aging resistance is strong, use cycle is long, unfavorable metamorphism and stunk.
3. Safety and health, non-toxic odorless, no stimulation to skin, normal use without adverse effects to the human body.
4. Product use method and matters needing attention
1. This product can directly add lubricating oil pool, when used with oil pump into the wire drawing machine submerged half cone pulley is appropriate, then circulation lubrication.
2. This product can't be mixed with water and other miscellaneous materials such as oil, acid, alkali. In general, please do not mix with other manufacturers products.
3. This product use about half a year of lubricating oil pool should be cleared within the aluminum powder, and pass by precipitation, filtration, cleaning after add lubricating oil pool and adding new oil before use
4. This product is unfavorable in open air, room temperature storage period is one year.
5. Product packaging 200 litres of iron drum, net weight 170 kg.

Hot Products


Website : http://www.js-jiachen.com Phone : 13506116401 Tel : 0519-88781384
点击关闭
佳辰二维码